Regulating Charge Transfer of Lattice Oxygen in Single‐Atom‐Doped Titania for Hydrogen Evolution

Single‐atom catalysts have attracted much attention. Reported herein is that regulating charge transfer of lattice oxygen atoms in serial single‐atom‐doped titania enables tunable hydrogen evolution reaction (HER) activity. First‐principles calculations disclose that the activity of lattice oxygen for the HER can be regularly promoted by substituting its nearest metal atom, and doping‐induced charge transfer plays an essential role. Besides, the realm of the charge transfer of the active site can be enlarged to the second nearest atom by creating oxygen vacancies, resulting in further optimization for the HER. Various single‐atom‐doped titania nanosheets were fabricated to validate the proposed model. Taking advantage of the localized charge transfer to the lattice atom is demonstrated to be feasible for realizing precise regulation of the electronic structures and thus catalytic activity of the nanosheets.     

Bridge Bonded Oxygen Ligands between Approximated FeN4 Sites Confer Catalysts with High ORR Performance

The applications of the most promising Fe—N–C catalysts are prohibited by their limited intrinsic activities. Manipulating the Fe energy level through anchoring electron‐withdrawing ligands is found effective in boosting the catalytic performance. However, such regulation remains elusive as the ligands are only uncontrollably introduced oweing to their energetically unstable nature. Herein, we report a rational manipulation strategy for introducing axial bonded O to the Fe sites, attained through hexa‐coordinating Fe with oxygen functional groups in the precursor. Moreover, the O modifier is stabilized by forming the Fe?O?Fe bridge bond, with the approximation of two FeN₄ sites. The energy level modulation thus created confers the sites with an intrinsic activity that is over 10 times higher than that of the normal FeN₄ site. Our finding opens a novel strategy to manage coordination environments at an atomic level for high activity ORR catalysts.     

Metal–Organic Framework Membrane Nanopores as Biomimetic Photoresponsive Ion Channels and Photodriven Ion Pumps

Biological ion channels and ion pumps with sub‐nanometer sizes modulate ion transport in response to external stimuli. Realizing such functions with sub‐nanometer solid‐state nanopores has been an important topic with wide practical applications. Herein, we demonstrate a biomimetic photoresponsive ion channel and photodriven ion pump using a porphyrin‐based metal–organic framework membrane with pore sizes comparable to hydrated ions. We show that the molecular‐size pores enable precise and robust optoelectronic ion transport modulation in a broad range of concentrations, unparalleled with conventional solid‐state nanopores. Upon decoration with platinum nanoparticles to form a Schottky barrier photodiode, photovoltage across the membrane is generated with “uphill” ion transport from low concentration to high concentration. These results may spark applications in energy conversion, ion sieving, and artificial photosynthesis.     

High‐Tc Enantiomeric Ferroelectrics Based on Homochiral Dabco‐derivatives (Dabco=1,4‐Diazabicyclo[2.2.2]octane)

1,4‐Diazabicyclo[2.2.2]octane (dabco) and its derivatives have been extensively utilized as building units of excellent molecular ferroelectrics for decades. However, the homochiral dabco‐based ferroelectric remains a blank. Herein, by adding a methyl (Me) group accompanied by the introduction of homochirality to the [H₂dabco]²⁺ in the non‐ferroelectric [H₂dabco][TFSA]₂ (TFSA=bis(trifluoromethylsulfonyl)ammonium), we successfully designed enantiomeric ferroelectrics [R and S‐2‐Me‐H₂dabco][TFSA]₂. The two enantiomers show two sequential phase transitions with transition temperature (T_c) as high as 405.8 K and 415.8 K, which is outstanding in both dabco‐based ferroelectrics and homochiral ferroelectrics. To our knowledge, [R and S‐2‐Me‐H₂dabco][TFSA]₂ are the first examples of dabco‐based homochiral ferroelectrics. This finding opens an avenue to construct dabco‐based homochiral ferroelectrics and will inspire the exploration of more eminent enantiomeric molecular ferroelectrics.     

Preparation of magnetic attapulgite/polypyrrole nanocomposites for magnetic effervescence‐assisted dispersive solid‐phase extraction of pyrethroids from honey samples

In this work, a novel extraction technique based on the effervescence‐assisted dispersion and magnetic recovery of attapulgite/polypyrrole sorbents was developed for determining the concentrations of five pyrethroids in honey samples. The magnetic nanoparticles were synthesized by a one‐pot method. Several experimental parameters that affected the extraction efficiency, including the dispersion conditions, pH, ionic strength, and desorption conditions, were investigated. Under optimal conditions, the calibration curves for the five pyrethroids in honey samples exhibited good linearity, with r² values ranging from 0.9979 to 0.9990. The limits of detection varied between 0.21 and 0.34 µg/L. Satisfactory recoveries of 81.42–106.73% with intra‐ and interday relative standard deviations of less than 6.94 and 10.89%, respectively, were obtained. Moreover, the sorbents exhibited acceptable batch‐to‐batch repeatability in the range of 5.06–15.01%, and each sorbent could be reused for up to four extraction cycles without a significant loss in the extraction recovery.     

Self‐assembly of poly(ionic liquid) functionalized mesoporous magnetic microspheres for the solid‐phase extraction of preservatives from milk samples

In this work, a novel, rapid, and simple analytical method was proposed for the detection of parabens in milk sample by gas chromatography coupled with mass spectrometry. At the same time, milk sample was pretreated by magnetic solid phase extraction, which detected up to five parabens. A series of important parameters of magnetic solid phase extraction were investigated and optimized, such as pH value of loading buffer, amount of material, adsorption time, ionic strength, eluting solvents, and eluting time. Under the optimized conditions, the corresponding values were more than 0.9991, limits of detection and the limit of quantification were 0.1 and 0.5 ng/mL, respectively. In addition, the recoveries were achieved in range of 95–105%, the liner range were within 0.1–600 ng/mL, and the relative standard deviations were even lower than 5%.     

Biosurfactant trehalose lipid‐enhanced ultrasound‐assisted micellar extraction and determination of the main antioxidant compounds from functional plant tea

Hydrosoluble trehalose lipid (a biosurfactant) was employed for the first time as a green extraction solution to extract the main antioxidant compounds (geniposidic acid, chlorogenic acid, caffeic acid, and rutin) from functional plant tea (Eucommia ulmoides leaves). Single‐factor tests and response surface methodology were employed to optimize the extraction conditions for ultrasound‐assisted micellar extraction combined with ultra‐high‐performance liquid chromatography in succession. A Box‐Behnken design (three‐level, three‐factorial) was used to determine the effects of extraction solvent concentration (1–5 mg/mL), extraction solvent volume (5–15 mL), and extraction time (20–40 min) at a uniform ultrasonic power and temperature. In consequence, the best analyte extraction yields could be attained when the trehalose lipid solution concentration was prepared at 3 mg/mL, the trehalose lipid solution volume was 10 mL and the extraction time was set to 35 min. In addition, the recoveries of the antioxidants from Eucommia ulmoides leaves analyzed by this analytical method ranged from 98.2 to 102%. These results indicated that biosurfactant‐enhanced ultrasound‐assisted micellar extraction coupled with a simple ultra‐high‐performance liquid chromatography method could be effectively applied in the extraction and analysis of antioxidants from Eucommia ulmoides leaf samples.     

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Recent advances in material design for organic solar cells(OSCs) are primarily focused on developing near-infrared nonfullerene acceptors, typically A-DA′D-A type acceptors(where A abbreviates an electron-withdrawing moiety and D, an electron-donor moiety), to achieve high external quantum efficiency while maintaining low voltage loss. However, the charge transport is still constrained by unfavorable molecular conformations, resulting in high energetic disorder and limiting the device performance. Here, a facile design strategy is reported by introducing the "wing"(alkyl chains) at the terminal of the DA′D central core of the A-DA′D-A type acceptor to achieve a favorable and ordered molecular orientation and therefore facilitate charge carrier transport. Benefitting from the reduced disorder, the electron mobilities could be significantly enhanced for the"wing"-containing molecules. By carefully changing the length of alkyl chains, the mobility of acceptor has been tuned to match with that of donor, leading to a minimized charge imbalance factor and a high fill factor(FF). We further provide useful design strategies for highly efficient OSCs with high FF.